EasyManuals Logo

Marantz SR7015 User Manual

Marantz SR7015
338 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
0
If the input for ZONE2 and ZONE3 is set to “Source”, all types of input signals can be listened to from ZONE2 and ZONE3.
0
If the input for ZONE2 is set to a specific source (like CBL/SAT), only analog signal or 2-channel PCM signal input (from HDMI connectors or digital connectors (OPTICAL/
COAXIAL)) can be listened to from ZONE2. To playback HDMI signal other than 2-channel PCM in ZONE2, set “HDMI Audio” to “PCM”. (v p. 259)
2-channel PCM signals are output from a device connected to the input source selected for ZONE2 and can be played back in ZONE2. In this case, the MAIN ZONE audio
will also be converted to 2-channel PCM signals if the MAIN ZONE and ZONE2 are set to the same input source. However, depending on the playback device, the playback
signal may not be converted to PCM even if this setting is configured.
0
The analog audio signal and the 2-channel PCM signal input from digital connectors (OPTICAL/COAXIAL) can be played back in ZONE3.
0
When “Component Video Out” in the menu is set to “ZONE2”, the component video output connector outputs the ZONE2 video. (v p. 203)
0
The menu screen is not output in ZONE2 and ZONE3.
Contents Connections Playback Settings Tips Appendix
169
Front panel Display Rear panel Remote Index

Other manuals for Marantz SR7015

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Marantz SR7015 and is the answer not in the manual?

Marantz SR7015 Specifications

General IconGeneral
Channels9.2
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive)165W
Power Output (6 ohm, 1 kHz, 10% 1ch Drive)235W
70% GuaranteeYes
Audio Inputs8
Multi-Channel Preamp Outputs11.2
Subwoofer Out2
HDMI Outputs3
HDMI 2.1 SupportYes
4K/120Hz Pass-ThroughYes
8K/60Hz Pass-ThroughYes
HDR SupportHDR10, HDR10+, Dolby Vision, HLG
eARCYes
Auto Speaker CalibrationAudyssey MultEQ XT32
Dolby AtmosYes
DTS:XYes
IMAX EnhancedYes
Auro-3DYes
HEOS Multi-roomYes
Roon TestedYes
Wi-FiYes
BluetoothYes
Voice ControlAmazon Alexa, Google Assistant, Apple Siri
EthernetYes
USB Port1 (front)
Phono InputYes
Supported Audio FormatsMP3, WMA, AAC, FLAC, ALAC, WAV, DSD
Digital Inputs2 Optical, 2 Coaxial
Zone Audio Output2
HDMI Inputs8 (1 front)
Speaker Terminals11 (8 assignable)
Weight14.8 kg

Related product manuals