o
Now Playing
Sets the display time for the playback display when the input source is
“HEOS Music”.
Always On
(Default):
Show display continuously.
Auto Off:
Show display for 30 seconds after
operation.
Screen Saver
Select the screen saver setting.
A screen saver is activated if no operation is performed for more than 5
minutes when no video signal is input or when the same screen (e.g. the
setup menu) is displayed.
Use uio p to clear the screen saver.
On: Turns screen saver on.
Off
(Default):
Turns screen saver off.
0
The screen saver is activated in the following cases.
0
When the setup menu is displayed
0
When no video signal is input
0
When the network, USB or Bluetooth playback screen is displayed
0
This feature will be supported via firmware update.
Contents Connections Playback Settings Tips Appendix
204
Front panel Display Rear panel Remote Index
To Next Page
Loading...
