EasyManuals Logo

Marantz SR7015 User Manual

Marantz SR7015
338 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #222 background imageLoading...
Page #222 background image
o
Subwoofer level error message and how to
adjust
The optimal level of each subwoofer channel for Audyssey
®
Setup
measurement is 75 dB.
During subwoofer level measurement, an error message is displayed
when one level of subwoofers is outside the 72 – 78 dB range.
When using a subwoofer with built-in amplifier (active type), adjust the
subwoofer volume so that the subwoofer level is within the 72 to 78 dB
range.
G Error message H
.
Audyssey Setup
Back SW Level MatchingSkip
Your Subwoofer 1’s level is too high.
If your subwoofer has a volume control on it,
select “SW Level Matching” to interactively adjust the level of
your subwoofer.
If your subwoofer does not have a volume control,
or if you do not want to use a subwoofer, select “Skip”.
1
Select “SW Level Matching” and then press ENTER.
2
Adjust the volume control on your subwoofer so that
the measured level is within the 72 to 78 dB range.
3
When the measured level is within the 72 to 78 dB
range, select “Next” and then press ENTER.
0
If you use two subwoofers, the second subwoofer’s adjustment
will be started. Repeat the operation from step 2, 3.
Contents Connections Playback Settings Tips Appendix
222
Front panel Display Rear panel Remote Index

Other manuals for Marantz SR7015

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Marantz SR7015 and is the answer not in the manual?

Marantz SR7015 Specifications

General IconGeneral
Channels9.2
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive)165W
Power Output (6 ohm, 1 kHz, 10% 1ch Drive)235W
70% GuaranteeYes
Audio Inputs8
Multi-Channel Preamp Outputs11.2
Subwoofer Out2
HDMI Outputs3
HDMI 2.1 SupportYes
4K/120Hz Pass-ThroughYes
8K/60Hz Pass-ThroughYes
HDR SupportHDR10, HDR10+, Dolby Vision, HLG
eARCYes
Auto Speaker CalibrationAudyssey MultEQ XT32
Dolby AtmosYes
DTS:XYes
IMAX EnhancedYes
Auro-3DYes
HEOS Multi-roomYes
Roon TestedYes
Wi-FiYes
BluetoothYes
Voice ControlAmazon Alexa, Google Assistant, Apple Siri
EthernetYes
USB Port1 (front)
Phono InputYes
Supported Audio FormatsMP3, WMA, AAC, FLAC, ALAC, WAV, DSD
Digital Inputs2 Optical, 2 Coaxial
Zone Audio Output2
HDMI Inputs8 (1 front)
Speaker Terminals11 (8 assignable)
Weight14.8 kg

Related product manuals