EasyManuals Logo

Marantz SR7015 User Manual

Marantz SR7015
338 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #240 background imageLoading...
Page #240 background image
Bass
Set subwoofer and LFE signal range playback.
o
Subwoofer Mode
Select low range signals to be reproduced by subwoofer.
LFE
(Default):
The low range signal of the channel set to
“Small” speaker size is added to the LFE
signal output from the subwoofer.
LFE+Main:
The low range signal of all channels is
added to the LFE signal output from the
subwoofer.
0
“Subwoofer Mode” can be set when “Speaker Config.” - “Subwoofer” in the
menu is set to other than “None”. (v p. 232)
0
Play music or a movie source and select the mode offering the strongest bass.
0
If “Speaker Config.” - “Front” and “Center” are set to “Large”, and “Subwoofer
Mode” is set to “LFE”, no sound may be output from the subwoofers,
depending on the input signal or selected sound mode. (v p. 232)
Select “LFE+Main” if you want the bass signals to always be produced from
the subwoofer.
0
The audio settings in “IMAX Audio Settings” are applied during IMAX
playback. (v p. 181)
o
LPF for LFE
Set LFE signal playback range. Set this when you want to change the
playback frequency (low pass filter point) of the subwoofer.
80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 180 Hz /
200 Hz / 250 Hz (Default: 120 Hz)
0
The audio settings in “IMAX Audio Settings” are applied during IMAX
playback. (v p. 181)
Contents Connections Playback Settings Tips Appendix
240
Front panel Display Rear panel Remote Index

Other manuals for Marantz SR7015

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Marantz SR7015 and is the answer not in the manual?

Marantz SR7015 Specifications

General IconGeneral
Channels9.2
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive)165W
Power Output (6 ohm, 1 kHz, 10% 1ch Drive)235W
70% GuaranteeYes
Audio Inputs8
Multi-Channel Preamp Outputs11.2
Subwoofer Out2
HDMI Outputs3
HDMI 2.1 SupportYes
4K/120Hz Pass-ThroughYes
8K/60Hz Pass-ThroughYes
HDR SupportHDR10, HDR10+, Dolby Vision, HLG
eARCYes
Auto Speaker CalibrationAudyssey MultEQ XT32
Dolby AtmosYes
DTS:XYes
IMAX EnhancedYes
Auro-3DYes
HEOS Multi-roomYes
Roon TestedYes
Wi-FiYes
BluetoothYes
Voice ControlAmazon Alexa, Google Assistant, Apple Siri
EthernetYes
USB Port1 (front)
Phono InputYes
Supported Audio FormatsMP3, WMA, AAC, FLAC, ALAC, WAV, DSD
Digital Inputs2 Optical, 2 Coaxial
Zone Audio Output2
HDMI Inputs8 (1 front)
Speaker Terminals11 (8 assignable)
Weight14.8 kg

Related product manuals