EasyManuals Logo

Marantz SR7015 User Manual

Marantz SR7015
338 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
Wireless LAN
When connecting to the network via wireless LAN, connect the external
antennas for Bluetooth/wireless connectivity connection to the rear panel
and stand them upright.
See “Wi-Fi Setup” on how to connect to a wireless LAN router.
(v p. 246)
.
Internet
Modem
Router with access point
To WAN side
0
When using this unit, we recommend you use a router equipped with the following
functions:
0
Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
0
Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching hub with a
speed of 100 Mbps or greater.
0
Only use a shielded STP or ScTP LAN cable (readily available at electronics
stores). (CAT-5 or greater recommended)
0
The normal shielded-type LAN cable is recommended.
If a flat-type cable or unshielded-type cable is used, other devices could be
affected by noise.
0
When using this unit connected to a network with no DHCP function, configure the
IP address, etc. in “Network”. (v p. 245)
NOTE
0
The types of routers that can be used depend on the ISP. Contact your ISP or a
computer shop for details.
0
This unit is not compatible with PPPoE. A PPPoE compatible router is required if
your contracted line is not set using PPPoE.
0
Do not connect a NETWORK connector directly to the LAN port / Ethernet
connector on your computer.
0
Various online services may be discontinued without prior notice.
Contents Connections Playback Settings Tips Appendix
89
Front panel Display Rear panel Remote Index

Other manuals for Marantz SR7015

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Marantz SR7015 and is the answer not in the manual?

Marantz SR7015 Specifications

General IconGeneral
Channels9.2
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive)165W
Power Output (6 ohm, 1 kHz, 10% 1ch Drive)235W
70% GuaranteeYes
Audio Inputs8
Multi-Channel Preamp Outputs11.2
Subwoofer Out2
HDMI Outputs3
HDMI 2.1 SupportYes
4K/120Hz Pass-ThroughYes
8K/60Hz Pass-ThroughYes
HDR SupportHDR10, HDR10+, Dolby Vision, HLG
eARCYes
Auto Speaker CalibrationAudyssey MultEQ XT32
Dolby AtmosYes
DTS:XYes
IMAX EnhancedYes
Auro-3DYes
HEOS Multi-roomYes
Roon TestedYes
Wi-FiYes
BluetoothYes
Voice ControlAmazon Alexa, Google Assistant, Apple Siri
EthernetYes
USB Port1 (front)
Phono InputYes
Supported Audio FormatsMP3, WMA, AAC, FLAC, ALAC, WAV, DSD
Digital Inputs2 Optical, 2 Coaxial
Zone Audio Output2
HDMI Inputs8 (1 front)
Speaker Terminals11 (8 assignable)
Weight14.8 kg

Related product manuals