Introduction
The imPower motor is a permanent magnet alternating current (PMAC)
electronically commutated motor (ECM), leveraging over 20 years of ECM
technical and manufacturing experience. The motor can save up to 85% of
electrical consumption due to this innovative motor design. This imPower motor
is designed to replace existing fulll-rated pool lter pump motors rated at 3/4 HP
1.65 SF or up-rated motor at 1.0HP 1.25 SF.
This motor also features three selectable speeds either through the use of the
patent pending auto speed switch feature, top panel push buttons, external
multi-speed timers, or through external automation controls.
RB003
Model Number 5SME29DFT001
Voltage 208-230V (±10%)
Flange Square
HP 1.0
Service Factor 1.25
High Speed 3450 RPM
Medium Speed 2600 RPM
Low Speed 1725 RPM
Weight 11 lbs
RB053
Model Number 5SME29DFT002
Voltage 208-230V (±10%)
Flange Round/C-Face
HP 1.0
Service Factor 1.0
High Speed 3450 RPM
Medium Speed 2600 RPM
Low Speed 1725 RPM
Weight 11 lbs
The installation manual enables a technician, certied by their local/state agency/
board, to install, service, repair, and maintain the imPower motor.
To Next Page
Loading...