Marathon Adanac 7000 ST083022 User Manual

Adanac 7000 Stopwatch
Model ST083022
User Manual
1
STOPWATCH MODE
In stopwatch mode, time is measured to the 1/100th second. The different functions can
be operated with the SPLIT/RESET and START/STOP keys.
Accumulated elapsed time measurement:
Press the START/STOP key to start.
Press the START/STOP key again to stop.
Press the START/STOP key again to restart.
Press the START/STOP key again to stop again.
Press the SPLIT/RESET key to reset the time displayed.
Split time measurement:
Press the START/STOP key to start.
Press the SPLIT/RESET key to split.
Press the SPLIT/RESET key again to split and release.
Press the START/STOP key again to stop.
Press the SPLIT/RESET key again to reset the time displayed.
Measurement between two competitors:
Press the START/STOP key to start.
Press the SPLIT/RESET key to split.
Press the START/STOP key to stop.
Press the SPLIT/RESET key to split and release.
Press the SPLIT/RESET key again to reset the time displayed.
Press the MODE key to return to the normal time mode.
ALARM SETTING MODE
An alarm time can be set on this stopwatch by following the steps below:
1. In normal time mode, press the MODE key twice to enter the alarm setting mode.
2. Press the SPLIT/RESET key to select hour or minute.
3. Press the START/STOP key to adjust the value.
4. When done, press the MODE key to return to the normal time mode.
NOTE:
When the clock reaches the alarm time, the alarm will sound.
- The alarm will stop automatically after one minute if no buttons are pressed and it will
sound again at the same time the next day.
- PresstheSTART/STOPkeytosnoozethealarm.Itwillsoundagainveminutes
later.
- Press the SPLIT/RESET key to stop the alarm. The alarm will be heard at the same
time the next day.
TIME SETTING MODE
Follow the steps below to set the time:
1. In normal time mode, press the MODE key three times to enter the time setting mode.
2. Press the SPLIT/RESET key to select the values to set. The setting sequence is:
second
minute hour date month weekday.
MAIN FEATURES
1. MODE KEY
- Press to switch between normal time mode, stopwatch mode, alarm setting mode
and time setting mode
2. SPLIT/RESET KEY
- In normal time mode, press to show the alarm time.
- In stopwatch mode, press to reset values or to show split time.
- In alarm setting mode, press to switch between hour and minute setting.
- In time setting mode, press to switch between time and date setting.
3. START/STOP KEY
- In normal time mode, press and hold to show the date.
- In stopwatch mode, press to start or stop the counting.
- In alarm or time setting mode, press to adjust the setting value.
4. LIQUID CRYSTAL DISPLAY (LCD)
5. LIGHT KEY
- In normal time mode, press and hold to show the date.
6. BATTERY DOOR
- Accommodates one lithium battery CR2032.
MODE SELECTION
This stopwatch includes four modes that can be accessed by pressing the MODE key.
The sequence is: NORMAL TIME MODE STOPWATCH MODE ALARM
SETTING MODE TIME SETTING MODE.
MODE SELECTION
The current time will be displayed in normal time mode.
Press and hold the SPLIT/RESET key to show the alarm time.
Press and hold the START/STOP key to show the month and the day.
In normal time mode, press and hold the SPLIT/RESET, then press the START/STOP
key to turn the alarm on or off.
7000
SKU# ST083022
CR2032
3V Lithium
2
4
5
1
3
6
7000
MANUAL ENGLISH

Marathon Adanac 7000 ST083022 Specifications

General

Brand	Marathon
Model	Adanac 7000 ST083022
Category	Watch
Language	English

Summary

Stopwatch Mode

Accumulated Elapsed Time Measurement

Measures total elapsed time in the stopwatch mode, starting and stopping with the START/STOP key.

Split Time Measurement

Allows recording of intermediate times during an ongoing stopwatch measurement using the SPLIT/RESET key.

Measurement Between Two Competitors

Enables timing of two competitors sequentially by using split and stop functions.

Main Features

MODE KEY

Switches between normal time, stopwatch, alarm, and time setting modes.

SPLIT/RESET KEY

Resets stopwatch values or displays split times; adjusts settings in mode screens.

START/STOP KEY

Starts, stops, or adjusts values during setting modes.

LIQUID CRYSTAL DISPLAY (LCD)

The screen that displays all time, date, and mode information.

LIGHT KEY

Activates the backlight for the LCD display.

BATTERY DOOR

Compartment for the CR2032 battery.

Mode Selection

Alarm Setting Mode

Time Setting Mode

Hourly Chime

Battery Replacement

Precautions

Specifications

Warranty