Thank you for purchasing this Analog Desk Alarm Clock with
Auto-Night Light. The utmost care has gone into the design
and manufacture of your clock. Please read the instructions
carefully and keep this manual for future reference.
CL030053BK
CL030053WH
CL030053BL
CL030053SV
CL030053GD
MAIN FEATURES
- Alarm and snooze function
- Backlight and night-light function
FUNCTION KEYS
1. [ SNOOZE/LIGHT ] key:
- Press to turn on backlight for 3 seconds.
When the alarm is sounding, press to enter snooze
mode for 4 minutes.
2. [ ALARM ON/OFF ] key:
- Press to turn on or turn off the alarm.
3. Night light sensor
automatically turn on in dim & dark environments as
detected by the light sensor.
- The brightness of the night light is dimmer than the normal
backlight.
- Slide to the < OFF > position to turn off the night light
function.
5.
[ SET ALARM ] knob:
- Adjust to set the alarm time.
DISPLAY
1. Hour hand
2. Alarm hand
3. Second hand
4. Minute hand
5. Dial
1
5
4
2
3
GETTING STARTED
- Remove the battery door of the unit.
- Insert 2 new AA size batteries according to the polarity
marks in the battery compartment.
- Replace the battery door.
OPERATION
(1) MANUAL TIME SETTING
After inserting batteries, you can set the time manually.
- Pull the [ SET ALARM ] knob out of the hole.
- Turn the [ SET ALARM ] knob counterclockwise to enter
time setting mode.
(2) ALARM TIME SETTING
Turn the [ SET ALARM ] knob counterclockwise (refer to
diagram below) to set the desired alarm time.
Analog Alarm Clock with
Auto Ambient Light Display
MANUAL ENGLISH
1
Model:
4. [ NIGHT LIGHT ON/OFF ] switch:
- Slide to the < ON > position to activate night light function.
- When switch is in the < ON > position, the backlight will
C1122C_CL030053 Manual A4_01.27.2016.indd 1 2016-02-01 1:51 PM
To Next Page
Need help?
General
