1
Thank you for your purchase of this Auto-Night
Light Analog Jumbo Wall Clock. The utmost care
has gone into the design and manufacture of
your clock. Please read the instructions carefully
and keep this manual for future reference.
CLOCK DISPLAY
1. Hour hand
2. Second hand
3. Minute hand
4. Dial
5.
Night-light sensor
6. Wall mounting holder
7. Time setting knob
-
Rotate the time setting knob to enter time
setting mode.
8. [ NIGHT-LIGHT ON/OFF ] slide switch
-
Slide it to < ON > position to activate
night-light function.
- When it is in the < ON > position, the light-night
will automatically turn on in dim & dark
environments as detected by the light sensor.
- Slide it to the < OFF > position to turn off the
night-light function.
9.
[ DEMO ] key
- Press to temporarily view how night-light works
in demo mode.
BATTERY REPLACEMENT
Your clock requires two different types of batteries.
When the clock stops, replace with a new AA size battery.
When the night light becomes dim, replace with 2x “C”
batteries at once. Pay attention to the battery polarity
marked in the battery
compartment.
Attention:
Please dispose of used batteries in an ecologically
safe manner.
SPECIFICATIONS
POWER
Clock 1x AA battery
Night-light 2x C batteries
Dimensions 300(W) x 300(H) x 51(D) mm
Auto-Night Light Analog
Jumbo Wall Clock
MANUAL ENGLISH
Designed in Canada / Conçu au Canada
Made in China / Fabriqué en Chine
C1125C_CL030057 Manual A5 2015.12.22.indd 1 2016-02-01 2:32 PM
To Next Page
Need help?
General