4
• This appliance is designed to be free-standing only, and should not be recessed or built-in.
• This unit is not designed for use in a garage or any other outside installation
• Ambient temperature below 50°F (10°C) or above 85°F (29.4°C) will hinder the performance of this
appliance.
• Avoid locating the refrigerator in moist areas.
• Locate the refrigerator away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
• Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.
• Select a location with enough space for the refrigerator doors to open easily;
• Select a location with level (or nearly level) flooring;
• Allow sufficient space to install the refrigerator on a flat surface;
• Allow clearance to the right, left, back and top when installing. This will help reduce power consumption
and keep your energy bills lower.
Installing your refrigerator
Levelling the refrigerator
To do this adjust the two levelling feet at front of the unit.
If the unit is not level, the doors and magnetic seal alignments will not be
covered properly.
Installation
* The above figures are a guideline for installation purposes.
The actual dimensions of the unit may vary slightly.
MFF182WFD | MFF180SSFD
To Next Page
Loading...
