Need help?Do you have a question about the MARBURG INDUSTRIES M500 and is the answer not in the manual?
Detailed steps for securing the machine to the conveyor using supplied hardware.
Instructions for connecting air supply and power to the control panel.
Procedure for adjusting gibs to enable raising and lowering the machine head.
Procedure for setting the machine height relative to the container and band.
Instructions for aligning guide rails with the applicator centerline for proper bottle travel.
Adjusting the angle of the cutter plate using screws and a scale for precise positioning.
Mounting and adjusting the photo-eye bracket for accurate container detection.
Instructions for placing the material roll and guiding it through the machine.
Guidance on placing and securing the crossfolding device within the machine.
Ensuring correct material path through feed rollers to the cutting assembly.
Explanation of two methods used to achieve registered bands using the photo-eye.
Procedure for setting up the photo-registration system to read marks during material movement.
An alternative method for photo-registration setup, primarily for M500-HS series.
Explanation of the functions for the 'A' and 'B' buttons on the control panel.
Accessing setup options, activating/deactivating photo-registration and horizontal perforation.
Procedure for adjusting the length of the band using the control panel interface.
Steps for removing vacuum block, material guide, guard, and female blade.
Instructions for removing and inspecting male and female blades and slide plate.
Steps for installing new blades, reassembling the cutter assembly, and re-installing the guard.
Procedures for testing cutter movement, re-installing guides, and final assembly.
Routine checks and lubrication tasks to be performed weekly.
Regular maintenance tasks to be performed on a monthly basis.
Maintenance tasks recommended for every two years of operation.
List of components and part numbers for the pre-feed system.
List of components and part numbers for the vertical perforation option.
Essential spare parts recommended for immediate stock.
Comprehensive list of spare parts for complete inventory management.
General| Brand | MARBURG INDUSTRIES |
|---|---|
| Model | M500 |
| Category | Industrial Equipment |
| Language | English |
To Next Page