35
NOTES
• The higher the intensity the better the
results will be. The units should feel strong
(with low frequency a good visible contrac-
tion) but within your tolerance level.
• When treating in high frequency be sure it
is “buzzing” directly over the pain and bring
the intensity high enough to desensitize
any pain signals. Never cause cramping or
muscle tetanization (that’s a signal to lower
the intensity or that you should be using low
frequency in that area)
*If congestion is primary concern use Low Frequency. If pain is primary and caused by other factors use High Frequency. Or use half and half.
SETTINGS
Channels: Frequency: Intensity:
A HIGH* 2 - 5
B LOW 3 - 6
To Next Page
Loading...
