36
Especially for back pain, reaching the target intensity level of 8-9 will help produce much more
signicant and much more lasting relief. It may take some time to slowly reach these target levels.
Turn the intensity levels up slowly until the “buzzing” feels very strong and intense, but not above
your tolerance (this will be different for everyone, but is commonly an intensity level of around 4).
Wait 1-2 minutes and as your body acclimates the signal will not feel as strong. At this time turn the
intensity level up slowly again until it feels very strong and intense, but not above your tolerance.
Wait a few minutes for your body to acclimate and repeat the process until you eventually reach the
target intensity range or as high as possible.
The signal should feel very strong and intense, but never continue if there is discomfort. If you need
to get up and move during treatment we recommend turning down the intensity then back up once
relaxing again.
To Next Page
Loading...
