Need help?Do you have a question about the March Networks 8732 R, 8532 R and is the answer not in the manual?
General| Brand | March Networks |
|---|---|
| Model | 8732 R, 8532 R |
| Category | DVR |
| Language | English |
Information on compliance with EMI regulations for Canada/US and EU directives.
Important safety precautions and disposal guidelines for NiCd and lithium batteries.
General safety instructions for handling the unit and power connections.
Guidelines for preventing damage from electrostatic discharge during installation.
Notices regarding servicing procedures, shipping, and environmental compliance.
Details on regulatory models and their corresponding NVR units.
Overview of the 32/16 channel 8000 Series NVR's capabilities and model differences.
List of items included in the system shipment and important handling warnings.
Technical specifications including dimensions, weight, and power ratings.
Recommended temperature ranges for operating and storing the unit.
Details on the unit's power input, current rating, frequency, and consumption.
Information on analog and IP camera input capabilities and model specific limits.
Details on frame rates for analog and IP camera inputs across different resolutions.
Explanation of the status indicators (LEDs) on the front panel of the unit.
Description of the front panel keyed power switch and USB ports.
Details on the back panel connections for 12V output, RS-485, and RS-232 interfaces.
Information on connecting alarm and switch devices to the unit's terminals.
Details on audio input and output terminals and their specifications.
Description of rear panel Ethernet, USB, Video, and HD Monitor outputs.
Information on the unit's power connector and fuse compartment, including fuse replacement.
Overview of hard drive installation and internal NiCd/lithium batteries.
Overview of the three mounting methods: rack, wall, and desk mounting.
Instructions for rack-mounting the docking station in a standard 19-inch rack.
General requirements and items needed for wall-mounting the unit.
Steps for attaching mounting brackets to the docking station for wall mounting.
Instructions for attaching mounting brackets directly to the recorder unit for wall mounting.
Information on desk-mounting the S Series unit, noting R series is not intended for this.
Detailed steps for installing or adding hard drives to the unit.
Instructions for powering the unit on and off using the keyed power switch.
To Next Page
