Marco BLASTMASTER M Series

Need help?

Do you have a question about the Marco BLASTMASTER M Series and is the answer not in the manual?

Summary

Company Profile

The Marco Difference

Details Marco's industry experience, manufacturing, customer service, product availability, logistics, and technology.

Definition of Terms

Warning Definitions

Definitions of hazard levels: Danger, Warning, Caution, and Notice.

Hazard Identifications

Air & Abrasive Consumption Chart

Daily Pre-Operation Checklist

Pre-Operation Checks

Details essential pre-operation checks for all system components including abrasive, air supply, and safety equipment.

Operating Instructions

Description

Overview of the blast pot and Marco's high-production mobile blasting systems.

Operational Requirements

Key requirements for air supply, system placement, and general operation.

Initial Setup

Steps for properly positioning the system and connecting air supply and blast hoses.

Before use - BLAST POT

Pre-use inspection and checks for the abrasive blasting pot and its components.

Before use - AFTERCOOLER

Pre-use inspection and checks for the aftercooler and its components.

Before use - 286 AIRLINE FILTER

Pre-use inspection and checks for the 286 Series Airline Filter.

During use - MOBILE BLASTING SYSTEMS

Operational procedures for using the mobile blasting system during operation.

After use

Procedures for safely shutting down and cleaning the system after use.

Installation of Bulk Bag Rack

Step-by-step instructions for installing the bulk bag rack on the 20.0 Cu. Ft. system.

Hoses and Connections

Information on inspecting and maintaining blast hoses, air hoses, and couplings for safe operation.

Specifications

3.5 Cu. Ft. Skid-Mounted Systems

Technical specifications for the 3.5 Cu. Ft. skid-mounted abrasive blasting system.

3.5 Cu. Ft. Trailer-Mounted Systems

Technical specifications for the 3.5 Cu. Ft. trailer-mounted abrasive blasting system.

3.5 Cu. Ft. M-Series 16 Trailer-Mounted Systems

Technical specifications for the 3.5 Cu. Ft. M-Series 16' trailer-mounted system.

6.5 Cu. Ft. Skid-Mounted Systems

Technical specifications for the 6.5 Cu. Ft. skid-mounted abrasive blasting system.

6.5 Cu. Ft. Trailer-Mounted Systems

Technical specifications for the 6.5 Cu. Ft. trailer-mounted abrasive blasting system.

20.0 Cu. Ft. Skid-Mounted Systems

Technical specifications for the 20.0 Cu. Ft. skid-mounted abrasive blasting system.

20.0 Cu. Ft. Trailer-Mounted Systems

Technical specifications for the 20.0 Cu. Ft. trailer-mounted abrasive blasting system.

Maintenance

Remove & Install Blast Pot

Procedure for safely removing and installing the abrasive blasting pot.

Remove & Install Aftercooler

Procedure for safely removing and installing the aftercooler.

Remove & Install 286 Airline Filter

Procedure for safely removing and installing the 286 Series Airline Filter.

Troubleshooting

Blast Pot Troubleshooting

Common symptoms and actions for resolving issues with the blast pot.

Intermittent abrasive flow

Troubleshooting steps for inconsistent abrasive flow during operation.

Aftercooler Troubleshooting

Common symptoms and actions for resolving issues with the aftercooler.

286 Airline Filter Troubleshooting

Common symptoms and actions for resolving issues with the 286 Airline Filter.

Literature References

3.5 Cu. Ft. Systems Literature Reference Guide

List of reference guides and manuals for 3.5 Cu. Ft. systems.

6.5 Cu. Ft. Systems Literature Reference Guide

List of reference guides and manuals for 6.5 Cu. Ft. systems.

20.0 Cu. Ft. Systems Literature Reference Guide

List of reference guides and manuals for 20.0 Cu. Ft. systems.

Additional Technical Data

Limited Warranty and Disclaimers

Details of the limited warranty, exclusions, limitations, and disclaimers for MARCO products.

Contact Information