Marco L Series - User Manual

2.0 Cubic Foot L-Series Blast Machine
Marco • 3425 East Locust Street • Davenport, Iowa 52803 • Certified ISO 9001:2000
Operator’s Manual
Part # 1090050
Revision: April 8, 2008
For more information call:
800-BLAST-IT
Phone: (800) 252-7848
Fax: (563) 324-6258
e-mail: sales@marcousa.com
www.marcousa.com
Before using this equipment, read, understand and follow all instructions in the Operator’s Manual. If the user or
assistants cannot read or understand the warnings and instructions, the employer of the user and assistants must
provide adequate and necessary training to ensure proper operation and compliance with all safety procedures
pertaining to this equipment. If Operator’s Manuals have been lost, contact your distributor or call (563) 324-2519
for replacements. Failure to comply with the above warning could result in death or serious injury.

Summary

Definition of Terms

Safety Symbol Definitions

Explains DANGER, WARNING, CAUTION, and NOTICE symbols used in the manual.

Critical Safety Warnings

Operational Safety Guidelines

Covers dust, PPE, maintenance, electrical safety, operation, and pressure limits.

Additional Safety Notices

Media and Airflow Specifications

Media Consumption Chart

Details air flow, media, and compressor requirements for various nozzle sizes.

Machine Description and Operation

Operational Requirements

Operating Instructions

Blasting Operation Procedures

Step-by-step guide for initiating, ceasing, and performing blast machine operations.

Troubleshooting Guide

Common Blast Machine Issues and Solutions

Addresses issues like no pressurization, no media flow, and inconsistent media flow with solutions.

Maintenance and Assembly

Nozzle and KwikFire 153 Installation

Nozzle Specifications

Ceramic Blast Nozzle Guide

Marco L Series Specifications

General

Brand	Marco
Model	L Series
Category	Industrial Equipment
Language	English