Need help?Do you have a question about the Marco UP3/E and is the answer not in the manual?
General| Self-priming | Yes |
|---|---|
| Fuse | 10A |
| Pump Body | Nickel-plated Brass |
| Voltage | 12V |
| Max Head | 15 m |
| Ports | 3/8" BSP female |
| Inlet/Outlet Size | 3/8" BSP female |
Describes the function of the blue LED during normal operation, priming, and low liquid states.
Explains the meaning of yellow, green, and red LED signals for various pump states and errors.
Details warnings from LED combinations and advises on safeguards like expansion tanks.
Presents key technical data including flow rate, pressure, self-priming, weight, and wire size.
Lists fluids that can be used with the pump and associated dangers for non-compliant liquids.
Specifies operating temperature, humidity limits, and advice for high-pressure usage.
Provides recommendations for safely handling and storing the pump.
Guides on inspecting the pump for damage, cleaning ports, and mounting location.
Instructions for connecting tubes and electrical wiring, including fuse requirements.
Highlights risks of incorrect wiring, undersized cabling, and voltage drop.
Steps to check for common issues when the pump fails to start or stops unexpectedly.
Lists potential causes and solutions for the pump not priming correctly.
Recommendations for maintaining the pump's performance and preventing issues during periods of inactivity.
Routine checks and cleaning for the inlet filter, pump chamber, and electrical wiring.
How to identify correct pump operation through temperature, flow, and amp-draw.
Advises consulting a technician for repairs and details warranty terms and conditions.
Provides a list of pump components with their descriptions and part numbers.
Graphical representation of the pump's flow rate (l/min) versus pressure (bar).
Graphical representation of the pump's current draw (A) versus pressure (bar) for 12V and 24V.
To Next Page
