Marcrist DDM150 - Technical Data; Supply; Application for Intended Use

4
Technical Data
Type
DDM150-1S /
230V
DDM150-1F /
230V
DDM150-1S /
110V
DDM150-1F /
110V
Nominal voltage
230 V
230 V
110 V
110 V
Power Drain
1900 W
1900 W
1700 W
1700 W
Frequency
50 Hz
50 Hz
60 Hz
60 Hz
Max. drilling diameter
Concrete
102mm
68mm
102mm
68mm
Max. drilling diameter
Masonry
152mm
117mm
152mm
117mm
Rated speed
0-1250 min-1
0-1750 min-1
0-1250 min-1
0-1750 min-1
Bit holder
½“ BSP - F
½“ BSP - F
½“ BSP - F
½“ BSP - F
Collar diameter
46mm
46mm
46mm
46mm
Protection class
II
II
II
II
Weight
4,0 Kg
4,0 Kg
4,0 Kg
4,0 Kg
Supply
- Diamond Core Drilling Machine,
- Operation Manual,
- Drift Key,
- ½“ BSP-M to ½“ BSP-M adaptor,
- Spanner,
- Professional Handle,
- Transport Case,
Application for Intended Use
This drilling machine is designed for dry core drilling only. It is used as a hand-
held manually operated machine only. The diamond core drilling machine
DDM150 is intended only for professional use and may only be operated by
instructed persons. In conjunction with the corresponding diamond core bits, the
machine is designed for drilling concrete, stone, bricks, sand-lime brick, aerated
concrete and masonry, asphalt.