5
DDDDMM22 –– 223300 SSaaffeettyy WWaarrnniinnggss && IInnffoorrmmaattiioonn
OObbsseerrvvee SSaaffeettyy IInnssttrruuccttiioonnss
When using the DDM2 - 230 observe the safety regulations applicable to your country
to reduce the risk of fire, electric shock and personal injury.
Read the safety instructions before attempting to operate the DDM2 - 230. Save
all warnings and instructions for future reference.
OOppeerraattiioonnaall SSaaffeettyy
• The DDM2 - 230 is a professional drilling machine capable of drilling up to 200mm
diameter and its internal clutch is calibrated to accommodate this.
• When drilling, at all times, care must be taken.
• Please study carefully the safety instructions and the training manual.
• Make sure that everybody who works with the DDM2 - 230 gets properly instructed to
the machine and its instructions prior to use.
• Assess the work area and employ measures to minimise any risks to you or other
persons.
• Always ensure you are working safely and within current legislation and regulations.
• Always wear eye protection, ear protection, dust mask and safety boots.
• Hold the DDM2 - 230 firmly with both hands.
• Always be aware that if the core bit jams the drill may rotate before the clutch
engages.
• Never drill from a position where you are not in full control of the DDM2 - 230.
• If drilling above chest height, work platforms should be used.
• Never drill from a ladder.
• Try to avoid continuous operation and consider a break once in a while. Stop working
immediately if you notice a tingle in your hands.
AAbboovvee ppooiinnttss aarree ttoo bbee oobbsseerrvveedd aatt aannyy ttiimmee.. FFaaiilliinngg ttoo ccoommppllyy mmaayy
rreessuulltt iinn sseerriioouuss ddaammaaggee oorr eennddaannggeerr yyoouurr hheeaalltthh.. IIff tthheerree aarree aannyy
qquueessttiioonnss oorr qquueerriieess,, pplleeaassee ccoonnttaacctt yyoouurr ddeeaalleerr..