EasyManua.ls Logo

MARIMEX Orlando - User Manual

MARIMEX Orlando
96 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Bazén Orlando
Návod kmontáži a použití
3,66 x 0,91 m
3,66 x 1,07 m
3,66 x 1,22 m
4,57 x 1,07 m
4,60 x 1,22 m
CZ
SK
DE
PL
EN
HU
CZ PŘED INSTALACÍ A POUŽITÍM BAZÉNU SI PEČLIVĚ PŘEČTĚTE NÁVOD NA POUŽITÍ
A NÁVOD NA INSTALACI. OBA NÁVODY SI USCHOVEJTE PRO DALŠÍ POUŽITÍ.

Table of Contents

Other manuals for MARIMEX Orlando

Question and Answer IconNeed help?

Do you have a question about the MARIMEX Orlando and is the answer not in the manual?

Summary

SAFETY RULES

INSTRUCTIONS FOR USE

INTRODUCTION

Provides an overview of the manual and usage instructions.

SPARE PARTS AND SERVICE

Information on obtaining spare parts and contacting for service.

POOL WATER CARE

Details on maintaining water quality, including pollution sources and treatment.

RECOMMENDED POOL WATER CHEMISTRY LEVELS

Specifies recommended levels for water hardness, pH, alkalinity, chlorine, and active oxygen.

POOL DIMENSIONS AND WATER VOLUME

Lists dimensions and water volume for different swimming pool types.

ASSEMBLY AND SITE PREPARATION

POOL SITE SELECTION

Guidance on choosing the right location and preparing the pool area.

ASSEMBLY DAY SELECTION

Advice on selecting an appropriate day for pool assembly, favouring calm weather.

TERRAIN PREPARATION GUIDELINES

Detailed instructions for preparing the ground, including leveling and soil considerations.

UNSUITABLE CONDITIONS TO AVOID

Lists unsuitable locations and conditions to avoid when setting up the pool.

PLAN AHEAD FOR ASSEMBLY

Considerations for future growth of vegetation and electrical equipment placement.

MARKING THE INSTALLATION AREA

Steps for marking the pool's perimeter on the ground.

AREA EXCAVATION AND TURF REMOVAL

Instructions for removing turf and preparing the excavation site.

FLATTENING AND FIRMING THE GROUND

Detailed steps to ensure the pool area is flat, horizontal, and firm.

SWIMMING POOL ASSEMBLY PROCEDURES

BOTTOM FRAME ASSEMBLY

Connecting the bottom rails to form the pool's base frame.

SPREADING FINE SAND BASE

Instructions for spreading a thin layer of sand to level the base.

SWIMMING POOL WALL ASSEMBLY

Guidance on building and joining the pool's vertical wall sections.

ENSURING WALL HORIZONTALITY AND CIRCULARITY

Checks and adjustments to ensure the pool wall is correctly positioned.

CREATING THE EARTH MOUND

Steps to form a protective earth mound around the pool base.

LINER AND TOP RAIL INSTALLATION

Procedures for fitting the pool liner and securing the top edge with rails.

FILLING THE POOL WITH WATER

Instructions for filling the pool with water and final checks.

POOL UNDERLAY USE INSTRUCTIONS

Guidelines for laying and using the protective pool underlay.

MARIMEX Orlando Specifications

General IconGeneral
BrandMARIMEX
ModelOrlando
CategorySwimming Pool
LanguageEnglish

Related product manuals