marinco SPL-12W - User Manual

Precision Spotlight Instructions Precision Spotlight Instructions
For more information and installation guides, visit
our website: www.marinco.com
For a FREE catalog of Marinco Recreational
Group products, contact your local dealer or visit
Marinco.com.
marinco.com
ZX447
MAR_TL_029_1011
LIMITED WARRANTY
For five (5) years from the date of purchase, Marinco will, at its discretion, repair or replace
for the original consumer, free of charge, any part or parts found upon examination by
Marinco to be defective in material or workmanship or both. All transportation charges under
this warranty must be borne by the consumer.
Proof of purchase is required. Proof of purchase must be a computerized receipt.
Handwritten receipts are not accepted.
THERE IS NO OTHER EXPRESSED WARRANTY. IMPLIED WARRANTIES, INCLUDING THOSE
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO
ONE YEAR FROM THE DATE OF PURCHASE. THIS IS THE EXCLUSIVE REMEDY AND
CONSEQUENTIAL DAMAGES ARE EXCLUDED WHERE PERMITTED BY LAW.
FCC
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUB-
JECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFER-
ENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
502-2 & 503-2 instructions
Instructions
marinco.com
Installing and Using the
Precision Spotlight
IMPORTANT!
READ THESE INSTRUCTIONS BEFORE INSTALLING AND USING THIS PRODUCT.
INTRODUCTION
The Marinco Precision spotlight uses a super bright 100 Watt, replaceable H3 Halogen bulb
that produces a rich yet intense beam that can illuminate objects up to 1,000ft away. It is
IP56 Weatherproof rated with a double o-ring sealed base, UV weather resistant housing
and fully enclosed tilt function driven by quiet motors that can withstand extreme tempera-
tures (5°F to 113°F or -15°C to 45°C). It has been designed and tested to withstand the
harsh marine environments including high humidity, salt water spray, shock, and vibration.
Innovative construction allows for upside down mounting and reverse motion programming.
Precision circuitry allows for remarkable aiming and tracking with two speed choices.
The Precision remotes have glow in the dark buttons and include one touch Automatic
Sweep and SOS options. The wireless remotes transmit a signal up too 200ft (60m). While
the spotlight comes with a wireless bridge remote there are two more optional remotes:
a wireless handheld remote w/lanyard (SPRL-1) and a hard wired bridge mount remote
(SPRL-3).
PACKAGE INCLUDES:
• Spotlightwith12Voltbulbinstalled
• Additional24Voltbulb**
• Mountingkit(nofastenersincluded)
• WirelessBridgeRemote
• Instructionmanual
 **(modelsSPL-12W,SPL-12B,SPL-12Conly)
MODELS: SPL-12W, SPL-12B, SPL-12C
MAR_TL_029_1011_Precision_Spotlight_ Manual_6x9_Ins.indd 1-2 11/3/11 11:15 AM

Summary

Precision Spotlight Instructions

Limited Warranty

Limited warranty details for the Marinco Precision spotlight, covering repairs or replacements.

FCC Compliance

FCC compliance statement regarding operation and interference.

Installation and Usage Guide

Instructions for installing and using the Marinco Precision spotlight.

Important Pre-Installation Notice

Important notice to read instructions before installing and using the product.

Product Introduction and Features

Overview of the Marinco Precision spotlight's features, capabilities, and design.

Package Contents

List of items included with the Marinco Precision spotlight package.

Installation Requirements and Warnings

Required Installation Items

List of required items and fasteners for installing the Marinco Precision spotlight.

Bulb Wattage Warning

Warning about potential damage if incorrect bulb wattage is used with the spotlight.

Lens Film Removal Warning

Warning to remove blue film from the lens before operation to prevent damage.

Mounting and Wiring Procedure

Step-by-step guide for mounting the spotlight and connecting its wiring.

Critical Wiring and Circuit Protection Standards

Critical safety warning regarding wire sizing and circuit protection according to ABYC standards.

Polarity Warning for Spotlight System

Warning about the importance of correct wire polarity for spotlight operation and preventing system damage.

Product Specifications

Bulb Specifications

Specifies the bulb type and voltage compatibility for the spotlight.

Power Requirements

Details the input voltage requirements for the spotlight.

Current Draw Details

Specifies idle and in-use current draw for the spotlight.

Peak Beam Intensity

Provides the peak beam intensity measurement in Lux.

Peak Beam Distance

Indicates the maximum effective beam distance of the spotlight.

Coverage Area

Details the coverage area at a specific distance.

Rotation and Tilt Range

Specifies the rotational and tilt range of the spotlight.

Wireless Range

Indicates the wireless communication range for remotes.

Physical Dimensions and Weight

Provides the physical dimensions and weight of the spotlight.

Materials and Construction

Details the material used for housing, lens, and wire types.

Operating Temperature and IP Rating

Specifies the operational temperature range and Ingress Protection rating.

Testing Compliance

Confirms testing compliance with ANSI/NEMA standard FL1.

Remote Operation and Mounting

Remote Specifications Overview

Details specifications for included and optional remote controls.

Remote Mounting Instructions

Guide for mounting remotes, including hole drilling and wiring.

Remote Pairing Procedure

Steps for pairing wireless remotes to the spotlight.

Inverted Spotlight Programming

Procedure to program the remote for upside-down spotlight mounting.

Lens Film Removal Reminder

Reminder to remove blue film from the lens before operation.

Spotlight Operation and Maintenance

Spotlight Control Functions

Explanation of spotlight operation buttons: Power, Speed Control, Auto Sweep, SOS.

Bulb Replacement Guide

Instructions for replacing the spotlight bulb, including safety precautions.

Lens and Reflector Removal

Steps for removing the lens and reflector assembly for maintenance.

New Bulb Handling Caution

Cautionary note about handling the glass surface of a new bulb.

marinco SPL-12W Specifications

General

Type	Spotlight
Power	12W
Voltage	12V DC
Wattage	12 W
Light Source	LED
IP Rating	IP67
Mounting	Surface
Color Temperature	6000K