Marineland MAXI-JET - User Manual

Start Here - MAXI-JET
™
Multi-Use Water Pumps
MAXI-JET (Setup Option A)
MAXI-JET PRO Power Head (Setup Option C)
5
1. ALWAYS use suction
cups to stabilize the pump.
1) Impeller Assembly
2) Impeller Cover
3) O-Ring
(Preinstalled)
4) Strainer/Prefilter
5) Mount
6) Suction Cups
09/10 AQ12332
2. Plug pump in.
NOTE: Make a
Drip Loop. (for safety)
NEVER let the pump run dry.
A
Option Laminar Flow - Submerged Under-Water Use
Start Your Pump (All Pump Models and Setup Options)
B
Option Power Head - Submerged Under-Water Use
C
Option Utility Pump - Submerged & External Out-of-Water Use
Questions or Missing Parts call Customer Service at (800) 322-1266 • www.marineland.com
Sump System
Setup
Water
Circulation
Setup
External
Setup
1. Assemble Magnet and Impeller 2. Insert Impeller
Assembly into Impeller Well 3. Attach Impeller Cover
4. Slide Strainer/Prefilter over intake 5. Slide Suction
Cup Mount onto the bottom of pump. 6. Place pump
in desired location continue onto Start Your Pump.
1. Assemble Magnet and Impeller 2. Insert Impeller
Assembly into Impeller Well 3. Attach Impeller Cover
4. Slide Undergravel Adapter over Intake 5. Slide Strainer/Prefilter onto Undergravel
Adapter 6. Attach the Rotational Output over the Outtake 7. Attach the Tube onto the
Rotational Output. Insert the Air Control Valve into the other end of Tube 8. Attach
Tube Router onto back of pump, attach Tube into Tube Router to secure it in place.
9. Slide the Suction Cup Mount onto the bottom of pump. 10. Place pump
in desired location continue onto Start Your Pump.
Laminar
Water
Circulation
Setup
Power Head
Water
Circulation
Setup
Impeller
Well
1. Assemble Magnet and Propeller 2. Insert Propeller Assembly into Propeller
Well 3. Slide Propeller Cover over Propeller 4. Slide the Omni-Directional
Mount onto the bottom of the pump 5. Slide Adapter Plate onto the
Omni-Directional Mount to attach the Suction Cup Mount 6. Place pump
inside tank in desired location then continue onto Start Your Pump.
Adapter
Plate
Suction Cup
Mount
Propeller
Assembly
Propeller Cover
Strainer/Prefilter
Impeller Cover
Suction Cup
Mount
Suction Cup
Mount
Impeller
Assembly
Impeller
Cover
Intake
Strainer/Prefilter
Undergravel
Adapter
Rotational Output
Outtake
Tube
Router
Tube
Air
Control
Valve
Quick Setup Option Guide
- SETUP OPTIONS -
1
2
4
6
Single Suction Cup
Mount OPTIONAL
Magnet
Propeller
Magnet
Impeller
O-Ring
(Preinstalled)
Propeller
Well
O-Ring
(Preinstalled)
O-Ring
(Preinstalled)
Impeller
Well
Intake
Impeller
Assembly
Omni-Directional
Mount
Magnet
Impeller
3
MAXI-JET PRO Laminar Flow (Setup Option B)
9
7
10
11) Air Control Valve 12) Tube Router 13) Tube
14) Undergravel Adapter 15) Rotational Output
13
7) Single Suction Cup Mount
8) Omni-Directional Mount with Adapter Plate
9) Propeller Assembly 10) Propeller Cover
8
14
15
12
11

Summary

MAXI-JET Multi-Use Water Pumps Setup Options Overview

MAXI-JET (Setup Option A) Components

Lists components for the standard MAXI-JET pump setup option A.

MAXI-JET PRO Laminar Flow (Setup Option B) Components

Lists components for the MAXI-JET PRO laminar flow pump setup option B.

MAXI-JET PRO Power Head (Setup Option C) Components

Lists components for the MAXI-JET PRO power head pump setup option C.

Detailed Setup Options

Option A: Utility Pump Setup

Instructions for setting up the utility pump for submerged and external out-of-water use.

Option B: Laminar Flow Submerged Setup

Instructions for setting up the laminar flow pump for submerged under-water use.

Option C: Power Head Submerged Setup

Instructions for setting up the power head pump for submerged under-water use.

Starting Your Pump

Pump Stabilization with Suction Cups

Guidance on using suction cups to properly stabilize the pump during operation.

Powering Up and Safety Precautions

Instructions for plugging in the pump, creating a drip loop, and avoiding dry running.

Marineland MAXI-JET Specifications

General

Voltage	120V
Hertz	60Hz
Type	Submersible
Models	MJ1200
Power Consumption	20 Watts
Cord Length	6 ft
Hose Diameter	0.5 inches