EasyManua.ls Logo

Mark L MLC - Front Panel Controls; Power LED and Mix Level Controls; Rear Panel Connectivity and Features; External Input and Mix 1 Connections

Mark L MLC
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FRONT PANEL
1. Power LED
2. MIX level controls : Stereo volume for MIX 1 and MIX 2.
Gain for LINE level is set with the knob at 11 o'clock.
Gain for GUITAR level is set with the knob at 14 o'clock.
REAR PANEL
All of the 1/4 inch jacks on the rear panel are for UNBALANCED mono plugs.
1. EXT IN: These outputs carry the same signals coming in the "Mix 1 In 1"
inputs. Enables you to feed these signals somewhere else without having to use
Y-cables.
2. Mix 1 Inputs: Four stereo, line level inputs to Mix 1.
3. Mix 1 Out: Two separate identical sets of Left and Right line level outputs
from Mix 1.
4. Mix 2 Inputs: Four stereo, line level inputs to Mix 2.
IMPORTANT: MIX 2 IN is controls the internal normal connection from
MIX 1 to MIX 2. If nothing is plugged in to these input, output from MIX 1 feed
through to MIX 2. If something is plugged in to these inputs, the internal MIX 1
& MIX 2 connection is broken.
5. Mix 2 Out: Left and Right line level outputs from Mix 2.
6. Ground/Lift switch
7. POWER: 9-12 VAC /300mA or 9-12 VDC / 400mA