EasyManua.ls Logo

Mark ECOFAN P120 - Technical Specifications

Mark ECOFAN P120
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
Read this document before
installing the appliance
1.0 General
1.1 All rights reserved
The manufacturer has a policy of continuous product improvement and reserves the right to make changes
to the specications without prior notice. The technical details are considered correct but do not form the
basis for a contract or warranty. All orders are accepted subject to the standard terms and conditions of
sale and delivery (which will be sent to you at your request).
1.2 General warnings
Installation must comply with the relevant local and/or national regulations. You must therefore have the
Ecofan P120 installed by a professionally qualied installer in accordance with all applicable national and
international regulations. Faulty installation, adjustment, alteration, maintenance activity or repair shall
render the warranty void.
2.0 Technicalspecications
Ecofan P120
Connected power 220-240V/50Hz
Output capacity W 65W
Capacity positions 3
Ø blades 48” (122 cm)
Weight (kg) 4,4 kg
Dimensions (cm) Ø 122 x 36 cm
Warning
Incorrect installation, adjustment, alteration, repair or maintenance work may lead to material
damage or injury. All work must be carried out by certied, qualied professionals. If the appliance
is not positioned in accordance with the instructions, the warranty shall be rendered void. This
appliance is not intended for use by children or persons with a physical, sensory or mental
handicap, or who lack the required experience or expertise, unless they are supervised or have
been instructed in the use of the appliance by somebody who is responsible for their safety.
Children must be supervised to ensure that they do not play with the appliance.
3