Mark Grizzly - Product Overview; Storage and Transport; Maintenance Procedures; Accidents and Rescue Plan

1.5 Storage and transport
• Store this product in a dry and clean place protected from mechanical (e.g. sharp
edges) and chemical hazards (e.g. acids, gas) at room temperature and protected
from light (e.g. UV).
• Store and transport this product in the original or an equivalent packaging.
1.6 Maintenance
• Repairs may only be eected by MARK Save A Life or a competent person.
• If the product has been subject to a fall, it must be disposed of properly (e.g. through
cutting it).
• This product must not be tumble-dried, dried in the sun or over a heat source
(e.g. fireplace).
• This product must not be disinfected or impregnated.
• Do not use chemicals when cleaning the product.
• This product must be inspected at least once a year from a competent person. Enter
the result of the inspection in the use protocol.
1.7 Accidents and rescue plan
• A suspension trauma can be triggered by a fall from height, a long descent or if a
person is helplessly suspended in the harness for a long time.
• Prepare a rescue plan indicating all possible rescue measures in case of emergency
before using this product.
• Check the use and fall area and make sure to secure, mitigate or remove possible
dangers before using this product.
 PRODUCT OVERVIEW
2.1 Technical details
• Overall: 65% polyester / 35% cotton
• Chest/leg straps: polyester
• D-rings: metal, coated
• Sizes: S-XXXXL
• max. load: 150kg
MARK Robin Hub
with Descent Stop Button
(as option)
 
Zip
2 Rings
Leg straps
chest strap
2.2 Marking
This product has a serial number on the label.
Remark on user manual
Serialnumber
CE-Identification of the supervisory
authority
Max. load
EN standard
Size specification
Productname
Date of production
Care label