Mark MBAR 381 IP - Page 11

6.8 CUSTOM COLOR SETTING
1) Press the 【ENTER】 button in 【CTST】 menu, then enter to the custom color setting.
2) Press the 【UP/DOWN】 select 【CT01】…【CT10】
3) Press the
【UP/DOWN】button to select【1-512】numerical value.
4) Press the
【ENTER】button to escape and save.
6.9 AUTO RUN, SELF-PROGRAM RUN
1)Press the【ENTER】button in【AUTO】menu, then enter to the auto run,self
-
program run.
2)Press the【UP/DOWN】button to select【AT01】…【AT05】，【SPEED】，【CHASE01】…【CHASE03
】
3)Press the
【
ENTER】button to start running.
6.10EDIT SELF-PROGRAM
1) Press the
【ENTER】button in【PROG】menu, then enter to the e
dit self
-program.
2) Press the
【UP/DOWN】button to select【CHASE01】…【CHASE03】
3) Press the
【ENTER】button for confirmation and enter to the next menu.
4) Press the
【UP/DOWN】button to select【SCENE01
】
…【SCENE20
】
5) Press the
【ENTER】button for confirmation and enter
to the next menu.
6) Then press the
【UP/DOWN】button to select【RED】…【SHUT】，【TIME】，【WAIT】，【USE】
7) Press the
【UP/DOWN】button to set up the parameter which are needed.
8) Press the
【ENTER】button t o escape and save.
Illustrations：When【USE】 is set to be
【
NO】，or th
e parameter of
【TIME】 is 0, it will not run this scene.When
【WAIT 】is set to be FADE time, the running process isas the following chart showing.
6.11 CHECK THE LIGHTING INFOR MATION
1) Press the
【ENTER】button in【INFO】menu, then enter to the checking the lighting information.
2) 【SOFT】button is for software version information.
MBAR 381 IP - 10 - User Manual/Manual de Uso
EN