Markator FlyMarker PRO - Entering Substitutes and Auto Data; Using F4 for Preset Substitutes; Auto Data Entry; Keyboard Locking and Unlocking

MARKATOR
Manfred Borries GmbH
Bunsenstraße 15
D-71642 Ludwigsburg
Tel.: +49 (0)7144 85 75-0
Fax.: +49 (0)7144 85 75-600
E-Mail: info@markator.de
Internet: http://www.markator.de
FlyMarker
®
PRO
Brief instruction
Use the Delete-key to delete the character below the cursor.
Use the Back delete-key to delete the sign on the left of the cursor.
Press the ESC-key to leave the menu.
3. Enter substitutes (Only possible after entering the password!)
With the F4-key the mode for choosing preset substitutes can be selected.
Substitutes start with the “>”-sign and end with the “<“-sign.
They only can be inserted or deleted completely (“> … <”).
Enter auto numbering
The number currently being used is displayed and marked.
Enter auto date
The current date is displayed and marked.
Enter auto time
The current time is displayed and marked.
Enter logo
The chosen logo is displayed and marked.
Press the ESC-key to leave the menu.
4. Locking / unlocking the keyboard
1. Press the key button.
√ The password dialog box appears.
2. F2 activates the keylock.
+
Do the same to unlock the keyboard.
5. Mark
FlyMarker
®
PRO must not be moved during the marking that follows.
Always avoid “air marking”!
Briefly press the trigger.
The trigger does not need to stay pressed until the end of marking.