Need help?Do you have a question about the MarkBass Bass Multiamp S and is the answer not in the manual?
General| Type | Bass Amplifier |
|---|---|
| Technology | Digital |
| Power Output | 500W |
| Channels | 2 |
| MIDI | Yes |
| USB | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| EQ | 4-band EQ |
| Speaker Outputs | Speakon |
| Inputs | 1 x 1/4” instrument input, 1 x XLR input |
| Outputs | XLR |
| Footswitch | Optional |
| Weight | 2.9 kg |
Contact details for warranty, service, and technical support.
Instructions for connecting the Bass Multiamp to various audio systems.
Steps for initial setup and configuration of the amplifier.
How to load, name, and save presets from the device's memory.
Explanation of slots for arranging amp models and effects.
Guide to choosing different amplifier models for the slots.
Controls and settings for the speaker cabinet simulation.
A step-by-step guide to building unique amplifier sounds.
Using the Send/Return for external effects and routing.
Using the unit as an effect processor or power amplifier.
Managing presets and banks via SD card.
Operations for storing, recalling, exporting, and deleting files.
Configuring amp modes, MIDI addresses, and control changes.
Guide for updating the device's firmware using an SD card.
Detailed technical data and features of the Bass Multiamp.
Visual overview of the device's internal signal flow and components.
Terms, conditions, and exclusions of the international limited warranty.
Instructions for registering the product to ensure warranty service.
To Next Page