11
Input Voltage 230 V (�) 50/60 Hz
Output Voltage
18 V (=)
Output Current < 1 A
Output Power max. 18 VA
3.Technical Data
Dear Parents,
Transformers for toys are not suitable to be used as
toys. Parents should monitor their use constantly.
Point
out to your children that the transformer is to be used
only as a means of operating the trains. The transformer
must not be moved while the train is being operated. Af-
ter the transformer has been turned off, it must never be
carried by holding it by its power cord. Make sure that
your children are aware of the dangers of the electricity
from the electrical outlets in your home.
As already discussed above, examine the transformer
and its power cord and other connections at regular
intervals (at least once a week depending on the how
often the trains are being operation) for damages. Be
sure the transformer is unplugged from the power outlet
before examining it. If you have the least suspicion
that the transformer may be damaged, do not use it
again until it has been repaired by the Märklin Repair
Department.
Make children aware that changes in the wiring must
never be done without adult supervision. Transformers
must always be connected to or disconnected from the
household current by plugging or unplugging the power
cord for the distribution strip!
2. Connecting the Transformer
Make sure that the power cords for all of the transform-
ers used with your layout are disconnected from the
household current before connecting a transformer to
the layout!
The power pack is solely designed for supplying power
to the Controler. No other users may be connected to
this power pack.
To make connections, simply insert the jack plug from
the connecting cable into the right socket on the con-
nector box.
Caution! Two power packs and 2 Controlers may not be
connected simultaneously to a layout.
To Next Page
Loading...
Need help?
General
