What to do if my Marks & Spencer LCD TV has no sound?
If your Marks & Spencer LCD TV has no sound, first ensure that the 'Mute' function is turned off. Then, check the volume settings to make sure the volume isn't set too low. Also, if you're using external leads, verify that they are properly connected.
Why is my Marks & Spencer MS1551DVB LCD TV showing a blue screen?
A blue screen on your Marks & Spencer LCD TV typically indicates either no signal or an incorrect source being selected. To resolve this, press the Source button to select the correct source.
What to do if my Marks & Spencer MS1551DVB LCD TV picture is noisy, snowy, or ghosting?
If you're experiencing a noisy, snowy, or ghosting picture on your Marks & Spencer LCD TV, it's likely due to a poor aerial signal. If you're using an indoor aerial, try repositioning it. Also, check the aerial connections to ensure they are secure.
What to do if my Marks & Spencer MS1551DVB LCD TV is dead and the LED is lit red?
If your Marks & Spencer LCD TV is dead but the LED is lit red, the set is likely in standby mode. Press either the Power button on the TV or the Power button on the remote control to turn it on.
General| Brand | Marks & Spencer |
|---|---|
| Model | MS1551DVB |
| Category | LCD TV |
| Language | English |
Guidelines for safe connection and use of electrical components.
Precautions for handling and placement to avoid physical damage or injury.
Identification and function of front panel controls and indicators on the TV.
Method to switch between different input sources like DTV, TV, HDMI.
Technical details of the TV system, screen size, resolution, and power.
Technical details of the remote control's type, distance, and batteries.
To Next Page