Need help?Do you have a question about the Marley Aquatower and is the answer not in the manual?
Procedure for checking the equipment upon arrival for damage or missing parts.
Site selection criteria for optimal tower performance and safety.
Guidelines for installing the cooling tower within a building structure.
Steps for physically setting up the cooling tower on its foundation.
Instructions for connecting water supply and drainage lines.
Specific piping guidelines for operation during freezing weather.
Procedures for installing the fan, motor, and associated components.
Detailed steps for mounting and aligning motor and drive components.
How to safely connect the motor to the power supply.
Step-by-step guide for initial startup and normal operation.
Recommended parameters for fan start/stop cycles to ensure longevity.
Strategies and precautions for operating the tower in cold conditions.
General advice and safety precautions for performing maintenance.
Lubrication and cleaning procedures for the fan motor.
Lubrication and checks for the fan shaft bearing.
How to inspect and adjust drive belt tension.
Procedure for verifying the float valve's operation and water level.
Steps for cleaning the water basin and intake screens.
Explanation and rates for continuous water discharge to control contaminants.
Regular checks and tasks to ensure tower integrity and performance.
Methods to prevent freezing during short shutdown periods in cold weather.
Steps for properly shutting down the tower for extended periods.
Specific motor care during long periods of inactivity.
General procedures for extended tower inactivity.
Wiring diagrams for single-phase motors with capacitors.
Additional wiring information for single-phase motors.
Wiring diagrams for three-phase motor configurations.
Wiring diagrams for motors with variable speed capabilities.
To Next Page
General