Marmitek Buzz LO - Technical Specifications

Buzz LO
TM
and Bell ME
TM
5
ENGLISH
Step 5 (optional): Installation of the Bell ME wireless
chime
The Bell ME wireless chime is sold separately. It is
possible to connect multiple wireless gongs to the Buzz
LO video doorbell, for example, for use in different
rooms.
1. Insert 3 AA batteries into the Bell ME, or power the
Bell ME through the micro-USB.
2. Short press the button on the Bell ME to put it
into pairing mode. A red light will flash to confirm.
3. Briefly press the button of the (already installed) Buzz
LO once. A melody will be played to confirm.
4. Now use the button to set the desired volume.
5. The button allows you to select a different
melody.
Follow the above steps again to connect an additional
Bell ME wireless chime (sold separately).
Step 6: Setting the chime type
In the Buzz LO menu you can select which chime type
you want to use. Open the Smart me app > select the
Buzz LO > select settings (pen in top right) > select 'Bell
settings'
• Existing doorbell - ON: notification via Smart me app,
the existing doorbell and (if connected) via wireless
doorbell (Bell ME).
• Existing doorbell - OFF: notification via Smart me app
and (if connected) via wireless doorbell (Bell ME)
Notes regarding the use of the product
• Once the installation is complete, you can operate
and configure the video doorbell using the app.
• Please visit our website www.marmitek.com for more
information and how to use the Smart me products.
Technical specifications
Buzz LO
Video resolution 1080p
Detection angle 145°
Compression H.264
Bandwidth 32 kbit/s ~ 2 Mbit/s
Night vision Infrared range up to 5 m
Audio 2-way communication
IP code IP54 (water resistant)
SD card Up to 128 GB, not included
Wireless technology Wi-Fi 2.4 GHz and RF 433
MHz
Power supply 8 ~ 16 VAC 50/60 Hz,
adapter not included
Standby consumption < 0,5 Watt
Operating temperature -20° tot 50°C
Dimensions 115 x 45 x 28 mm
Bell ME (available separately)
Wireless technology RF 433 MHz
Maximum range Up to 80 m LOS (line of
sight)
Volume level Adjustable in 4 steps
Power supply 3x AA batteries (not
included) or micro USB
(cable not included)
Dimensions 75 x 75 x 30 mm
Declaration of Conformity
Hereby, Marmitek BV, declares that the Buzz LO and Bell ME are in compliance with the essential
requirements of the 2014/53/EU Directives. Full Declaration of Conformity is available at
www.marmitek.com/en/declarations-of-conformity/
More detailed user guide and instructions are available on our website at www.marmitek.com