INVISIBLE CONTROL 2™ 3
SAFETY WARNINGS
x To prevent short circuits, this product should only be used inside and only
in dry spaces. Do not expose the components to rain or moisture. Do not
use the product close to a bath, swimming pool etc.
x Do not expose the components of your systems to extremely high
temperatures or bright light sources.
x In case of improper usage or if you have altered and repaired the product
yourself, all guarantees expire. Marmitek does not accept responsibility in
the case of improper usage of the product or when the product is used for
purposes other than specified. Marmitek does not accept responsibility for
additional damage other than covered by the legal product responsibility.
x This product is not a toy. Keep out of reach of children.
x Do not open the product: the device may contain live parts. The product
should only be repaired or serviced by a qualified expert.
x Only connect the adapter to the mains after checking whether the mains
voltage is the same as the values on the identification tags. Never connect
an adapter or power cord when it is damaged. In that case, contact your
supplier.
1. INTRODUCTION
Congratulation on buying the Invisible Control 2™. With the Invisible Control 2™
you can extend the IR (infra-red) signals from your own remote control. The
Invisible Control 2™ gives you the opportunity to control your A/V equipment
when it’s stored away in a closed cabinet or placed out of sight.
Marmitek products are manufactured with the utmost care and are exceptionally
high quality. Please read this manual carefully and follow the instructions in
order to get the best from this product.
2. SET CONTENT
1x Invisible Control 2™
1x IR Extender cable with 2 IR LEDs
1x Power Adapters
1x User manual
To Next Page
Loading...
Need help?
General
