Need help?Do you have a question about the Marmitek IR 100 USB and is the answer not in the manual?
General| Type | AV transmitter & receiver |
|---|---|
| Proper use | Universal |
| Product color | Black |
| Maximum resolution | - pixels |
| Maximum transfer distance | 8 m |
| Number of devices supported | - |
| Frequency | 6000 MHz |
| AC input voltage | 5 V |
| Power source type | USB |
| Manual | Yes |
| Number of receivers included | 1 |
| Receiving angle | 60 ° |
| Infrared (IR) frequency range | 30 - 60 kHz |
| Infrared (IR) transmission range | 2 m |
Weight and Dimensions| Package depth | 70 mm |
|---|---|
| Package width | 130 mm |
| Package height | 220 mm |
| Receiver dimensions (WxDxH) | 90 x 75 x 30 mm |
Details on powering the device via USB, including notes on port compatibility and extension cables.
Guidance on optimal placement for the IR receiver to ensure it can be seen by remote controls.
Instructions on where to place IR blaster LEDs for effective control of AV equipment.
To Next Page
