Need help?Do you have a question about the Marmitek Mini Timer MT20 and is the answer not in the manual?
Components that receive X-10 signals to control attached lamps or appliances.
Components that transmit X-10 signals to control modules.
Wireless components that send signals to controllers for X-10 communication.
Users must be aware of potential unexpected consequences when operating X-10 systems.
Explains the functionality of the Mini Timer as an X-10 controller and alarm clock.
Selects operating modes: timed events, Housecode, or clock setting.
Instantly turn Modules 1-4 or 5-8 on/off, or set times in Prog Set/Review mode.
Adjusts clock time, event times, and dims lights for Lamp/Wall Switch Modules.
Sets the internal alarm buzzer time using button number 1.
Turns off all connected X-10 Modules instantly.
Cycles through programming modes: Daily, Once, and Security.
Turns on all connected Lamp/dimmer Modules instantly.
Connects the Mini Timer to power and installs batteries for backup protection.
Guides users to set up and test X-10 modules before programming timed events.
Explains spontaneous module activation due to shared House Codes or interference.
Troubleshooting steps for modules not responding to the controller, focusing on House Code.
Explains the need for a transceiver for remotes/sensors to work with X-10 modules.
Discusses using multiple transceivers to extend remote range and optimize performance.
Troubleshooting specific module control issues via Mini Timer buttons.
General troubleshooting for complete lack of module control from the Mini Timer.
To Next Page
General