Marpo Kinetics, Inc.
258 LINDBERGH AVE, Livermore, CA 94551 • (925) 606-6919 • www.marpokinetics.com
17. If your unit has rope with plastic end cap connection follow these instructions to connect
the ends of the rope. Pin the chain link in the end cap with the provided
1/4-20 set screw. Before you install this screw ensure the rope is not twisted as this will
create kinks in the rope over time.
IMPORTANT: YOU MUST LOCK THE ROPE CONNECTION SET SCREW BY
PLACING A DROP OF SUPER GLUE ON THE LAST 3-4 THREADS OF THE
SCREW RIGHT BEFORE YOU HAVE INSERTED IT ALL THE WAY IN THE
PLASTIC END CAP. (see illustration below)
6
Rope ends
connection
Place a drop of
super glue here
To Next Page
