1
Gobo Replacement (English)
Products:
• Gesture Spot 300
• Gesture Spot 400
• Gesture Spot 500
To replace a gobo:
1. Power the fixture off. On the top of the fixture, press the gobo compartment door downward and
slide it off.
2. In the compartment, turn the gobo wheel to find the one you want to replace.
3. Gently pull the gobo and its holder away from the gobo wheel so it “unlocks” from the wheel, and
then pull it upward to remove it from the slot.
4. Remove the gobo from its holder by carefully removing the retention ring (this may require
breaking the white glue points), and replace the desired gobo. Make sure the retention ring locks
into the groove to ensure the gobo is secured in the holder.
5. Gently reinsert the gobo holder into the slot, and then push it into the wheel to “lock” it back in its
position.
6. Optional: To replace more gobos, repeat Steps 3–6.
7. Align the gobo compartment door with the opening (matching the flat and arched sides of the
door with their respective edges), and then slide it back on. Make sure it “locks” securely to its
original position.
13
4
5
2
v1.0
For additional product support,
visit marqlighting.com/support
To Next Page
Need help?
General