10 MARQ Golfer (Gen2)
EN
outdoor, athletic, and fitness activities.
When you start an activity, the watch
displays and records sensor data. You
can create custom activities or new
activities based on default activities.
When you finish your activities, you can
save and share them with the Garmin
Connect community.
Starting an Activity
1 From the watch face, press START.
2 Select an activity.
3 If the activity requires GPS, go
outside, and wait while the watch
locates satellites.
4 Press START to start the activity
timer.
NOTE: The watch does not record
your activity data until you start the
activity timer.
5 After you complete your activity,
press STOP to stop the activity
timer.
6 Select Save to save the activity and
review the activity summary.
Device Information
Viewing Device Information
You can view device information, such
as the E-label, unit ID, software version,
regulatory information, and license
agreement.
1 Hold MENU.
2 Select > System > About.
About the AMOLED Display
By default, the watch settings
are optimized for battery life and
performance.
Image persistence, or pixel “burn-in,” is
normal behavior for AMOLED devices.
To extend the display life, you should
avoid displaying static images at high
brightness levels for long time periods.
To minimize burn-in, the MARQ Athlete
display turns off after the selected
timeout. You can turn your wrist toward
your body, tap the touchscreen, or press
a button to wake the device.
To Next Page
Loading...
