EasyManua.ls Logo

Marq GOLFER - Changing Integrated QuickFit Accessories; Charging the Device

Marq GOLFER
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12 MARQ Golfer (Gen2)
EN
2 Align the new hinged strap with the
watch.
3 Press the strap into place.
NOTE: Make sure the strap is
secure. The latch should close over
the watch pin.
Changing Integrated QuickFit
Accessories
1 Pull to open the latch, and remove
the integrated QuickFit strap or
bracelet from the watch.
2 Pull to open the latch on the
integrated strap or bracelet, and
align it with the watch.
3 Close the latch over the watch pin.
NOTE: Make sure the strap or
bracelet is secure. There should be a
small gap
between the latch and
the strap or bracelet.
Charging the Device
WARNING
This device contains a lithium-ion
battery. See the Important Safety
and Product Information guide in the
product box for product warnings and
other important information.
Both the device and its charger contain
magnets. Under certain circumstances,
magnets may cause interference
with some medical devices, including
pacemakers and insulin pumps.
Devices and chargers that contain
magnets should be kept away from
such medical devices.

Related product manuals