Marquant 014369 - Precipitation Features; Reset of Precipitation Data; Graphic Precipitation Gauge; Precipitation History Per Month

EN
34
• Each segment indicates 5.08 mm
(0.2 inches) of precipitation.
• The image can change up to 1270 mm
(50 inches) of precipitation. For over
1270 mm (50 inches) of precipitation the
image shows a full precipitation gauge.
PRECIPITATION HISTORY PER
MONTH
The precipitation history for the last 12 months
can be shown month by month.
1. Press the HIST/UP button to show the
total amount of precipitation for the
previous months.
– History for month and year and total
amount of precipitation can be
shown.
2. When the history for a month is shown,
press the buttons HIST/UP and RAIN/
ALERT at the same time to reset data for
the month.
FIG. 5
IMPORTANT:
• The display mode closes after 5 seconds
if no buttons are pressed, after which
the clock display image is shown.
• It is possible to browse back 12 months
in the history with the HIST/UP button,
after which the data for the present
month is shown again.
PRECIPITATION WARNING 24
HOURS
Press the button for 2 seconds until the icon
for temperature warning starts ashing.
1. Press the RAIN/ALERT button for
3 seconds to activate settings mode for
weather warnings. OFF starts ashing for
warning. Use the buttons HIST/UP and
DOWN to activate (ON) or deactivate the
warning function (OFF).
24-hour period. The value is updated
every day at 00:00, which is why it is
important that the clock is set correctly.
• History for the month is for the calendar
months, for example 1 January to 31 January.
Resets to 0 at the end of each month.
• History for the year is for the calendar
year, from 1 January.
• Total history shows the cumulative value
for precipitation since the product was
started, or from the last reset.
Reset of precipitation data
Press the buttons HIST/UP and RAIN/ALERT
at the same time for 3 seconds to reset all
precipitation data.
NOTE:
This does not aect the 12-month history,
which is saved in the memory.
GRAPHIC PRECIPITATION GAUGE
An image of a precipitation meter is shown
on the display with 10 segments, which change
depending on the total precipitation.
The gures beside the image change when
the amount of precipitation increases.
FIG. 4
Up to 25.4 mm (1 inch) of
precipitation
• Each segment indicates 2.54 mm (0.1
inch) of precipitation.
• The complete image represents 25.4 mm
(1 inch).
More than 25.4 mm (1 inch) of
precipitation
• The complete image represents 50.8 mm
(2 inches).