Marquis Spas THE QUEST User Manual

PUMP PRIMING (Pr)
Pump priming feature begins at start-up. When your spa
is energized, the LCD window displays a “Pr” message.
This mode lasts approximately four to five minutes, if
not exited manually by pressing the TEMP pad.
UNDERWATER AND ENTRYWAY LIGHTS
Press the LIGHT pad to turn the underwater and
Entryway lights on and off. The low-voltage system
produces a night light for evening use and makes
entering and exiting the spa safer. After being on for
60 minutes, the lights automatically turn off.
AQUA AMBIANCE™
Use SPA LIGHT pad. Step one: turn on light. Step two:
turn off and then on within 2-3 seconds. Repeat for
all options: white, aqua, violet, blue, gold, green, red,
color wash, and blinking party mode. When switched
off for over 10 seconds your last color mode will be
saved in memory. To reset synchronization (two light
systems) turn light off for 5 seconds and turn back on.
WATERFALL FEATURE
The Waterfall feature and Convenience Center
attaches securely to the dual Vortex skimmer tops.
The water flow is controlled by an independent valve.
NOTE: Don’t remove the waterfall top while the
pumps are running.
JETS
Use the JETS pad on the bather panel or remote
control. First press of the JETS pad activates pump
on low-speed (and starts soak timer). Second press
of the JETS pad activates pump on high-speed. Third
press of the JETS pad turns jets off for all-quiet mode.
Fourth press of the JETS pad turns pump back to
low-speed. If the pump is already on low (heating,
filter cycle) then the first press starts the soak timer.
After running on low- or high-speed for 15 minutes,
the pump automatically turns off (unless in heating or
filtering cycle).
PAGE 27
THE QUEST
spa control operation
REMOTE CONTROL
MARQUIS SPAS

Marquis Spas THE QUEST Specifications

General

Brand	Marquis Spas
Model	THE QUEST
Category	Hot Tub
Language	English

Summary

Spa Control Operation

Pump Priming

Jets Operation

ConstantClean™ Water Management

Explains the ConstantClean system, factory default settings for filter cycles, and smart logic.

Solid-State Ozonator

SmartClean Filtration

Details the preset SmartClean filtration cycle and how to adjust filter settings.

Temperature Display and Adjustment

Explains how to view and adjust the spa's temperature settings.

Heat Mode Settings

Details the three heat modes: Standard, Economy, and Sleep, and their operational differences.

System Lock

Clock and Filter Cycle Programming

Provides instructions on setting the spa's clock and programming filter cycles.

Panel Lock

User Preference Settings

Quiet Soak Mode

Soundsations™ Audio System

Troubleshooting

Equipment Not Operating

Provides steps to troubleshoot issues where the spa equipment will not operate.

Inadequate Jet Action

Offers solutions for problems related to inadequate or weak jet performance.

No Heat Issues

Guides on how to diagnose and resolve issues with the spa not heating.

Light Not Working

Provides steps to troubleshoot and fix issues with the spa light not functioning.

LCD Diagnostic Messages

Explains various diagnostic messages displayed on the LCD and their meanings.

Specific Error Codes

Details specific error codes like OHH, OHS, ICE, SnA, Snb, SnS and their causes.

Additional Error Codes

Explains additional error codes like HFL, LF, dr, dry, Pr, and temperature display messages.

Maintenance Reminders Display

Marquis Care and Enjoyment Guide

Water Treatment Overview

Chemical Safety Procedures

Outlines crucial safety procedures for handling and storing spa chemicals.

Understanding Water Balance

Explains the factors determining spa water quality and balance.

Sanitizing Methods

Alkalinity and pH Level

Shocking Procedure

Spa Frog® Sanitation System

Balancing the Water

Spa Frog® Cartridge Management

Water Care Regimen

Troubleshooting Guide (Common Issues)

Lists causes and solutions for common spa water issues like cloudy water and odors.

Troubleshooting Guide (Sanitizer/pH Issues)

Addresses sanitizer, pH, and algae-related issues and their solutions.

Maintenance

Weekly Maintenance

Monthly Maintenance

Three to Four Month Maintenance

Interior Cleaning and Refilling

Suspended Use or Winterizing