MSB0
USER GUIDE
A. Buons:
ON/OFF : Turn the speaker on by sliding this buon to the right and turn it off by
sliding the buon to the le .
: Press this buon to switch between the different modes: Bluetooth, USB, MicroSD,
FM Radio..
: Tap this buon to change to the last song. Press and hold to reduce volume.
: Press this buon to play the music, press again to pause it.
: Tap this buon to change to the next song. Press and hold to increase volume.
MIC-VOL : Press this buon to adjust the volume of the microphone.
B. Baery:
Please make sure the speaker is fully charged when you use it for the first me.
Follow these steps to charge your MSB0:
1. Connect the MSB0 to your PC. RED light will show while charging.
2. When the light is off, MSB0 is fully charged.
D. USB Mode:
Plug the USB pendrive into the USB port. MSB0 will switch to USB Mode and the
audio file will play automacally.
If you want to switch modes while the USB is connected, simply tap “M” and cycle
between modes.
E. Microphone:
Connect your microphone to the MSB0 via jack port and MSB0 will switch to
Karaoke Mode, allowing you to use the speaker as a voice amplifier.
F. AUX Mode:
Connect a device (such as phones, computers, tablets or i-pods) to the AUX port via
minijack and you will be able to use the MSB0 as a loudspeaker.
C. Bluetooth Mode:
Once the Bluetooth Mode is acvated the LED will display “BLUE” on the screen,
indicang the speaker is ready to connect. When the word “BLUE” appears in the
display, MSB0 can be connected to phone or tablet successfully. Follow these steps
to connect your phone/tablet via bluetooth:
1. Start the Bluetooth mode on your phone/tablet and tap “search device”.
Your phone/tablet will begin to search for Bluetooth devices.
2. The phone/tablet will display “MSB0” on its Bluetooth devices list. Tap
on it to connect.
3. Play the audio file you want to listen through your MSB0.
Precauons
1. Please store the product in a room temperature environment.
2. Do not expose the product in rain or wet condions.
3. Do not drop the product.
4. Do not disassemble or repair the product by yourself. Any disassembly or
reparaon will invalidate the warranty.
5. Please use the correct voltage when charging the speaker.
6. Don’t use the speaker in high volume for a long me: it may cause hearing damage.
From Mars Gaming we want to thank you for buying our MSB0 Bluetooth Speaker.
Enjoy your music wherever you are!
Note to user: Please read this manual before using your speaker and keep this sheet
for future reference
Frequently asked quesons
Quesons
Unsuccessful
connecon
No voice /
Sound
distoron
Stuering
music
LED indicator
not shining
Soluons
1. Make sure the speaker is in Bluetooth mode.
2. Make sure the speaker is not connected to another device.
3. Check if there are too many Bluetooth devices working in the
area, it can interfere its connecon.
4. Try to restart the Bluetooth of your device and reconnect to
the speaker again.
1. Check the volume of the phone and the speaker and adjust it.
2. Check if the baery is low and recharge it if necessary.
1. Check if the device is too far from the Bluetooth device.
2. Check if there is any obstacle between the speaker and the
device.
1. Baery is low.
2. Recharge it and reboot the speaker.
ES Manual en español en www.marsgaming.eu / IT Manuale in italiano su www.marsgaming.eu /
PT Manual português em www.marsgaming.eu / FR Manuel en français sur www.marsgaming.eu /
DE Handbuch in deutsch in www.marsgaming.eu / PL Instrukcja obsługi w języku polskim www.marsgaming.eu /
RU Руководство по эксплуатации на русском языке по адресу www.marsgaming.eu
M
To Next Page
Need help?
General
