EasyManuals Logo

Mars Camargue User Manual

Default Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
In this brochure you can learn what you need to keep in mind when you use your
spa, and how you do a maintaining. This guide is for indoor whirlpool with 200-
300 liters of water, intended for 1-3 persons.
BEFORE USING YOUR SPA
Different bacteria can thrive in a hot tub which is not kept properly clean. Fortunately, the
bacteria can be effectively defeated with SunWac 3 Sanitizing tablets.
1. Fill the tub to the normal water level and start water circulation.
2. Add one SunWac 3 tablet to the water for each person in the bath.
3. After about a minute, the tablets are completely dissolved and you can climb aboard and
enjoy the bubbles.
Tip: Wash before bath. You pollute bathing water 200 times more if you have not washed
before you go into the tub. Therefore, it is a good idea to wash yourself thoroughly before you
use your hot tub. It makes the experience better and cleaning easier.
AFTER YOU HAVE USED YOUR SPA
Every time you step out of your hot tub, clean the water system. It is quickly done and it helps
to ensure hygiene next time you are in the spa.
1. Keep the water- and air jets operating, while adding one SunWac 3 tablet to the water for
each person who has been in the spa.
2. Allow the water to circulate for one minute and drain the spa and dry it.
HOW TO MAINTAIN SPA
It is not enough to simply pour the used bathing water out every time you use your hot tub.
No, even if you have a self-emptying spa or air drying of the pipes. There may easily hide
bacteria in the residual fat in the tubes.
Therefore, you need to ensure regular cleaning of the entire piping system. We recommend
that you do so every three months.
1. Fill the whirlpool to normal water height - used bathing water can be used.
2. Add the contents of the bottle, 125 ml, per 200-300 liters of water.
3. Start the water circulation, but not air inlet-blowing.
4. Let the pump operate for about 10 minutes.
5. Stop the water circulation and empty the whirlpool from water.
6. Rinse with clean water and dry the whirlpool.
Whirlpools in hotels and rental houses are cleaned every 4-8 weeks, in home 3-4 times a year.
You should not bath in the water where has been added Pipe Cleaner. During cleaning, irritating
odor arises - effective ventilation of the room is recommended.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mars Camargue and is the answer not in the manual?

Mars Camargue Specifications

General IconGeneral
BrandMars
ModelCamargue
CategoryHot Tub
LanguageEnglish