EasyManua.ls Logo

MARSH SOUND DESIGN A200S User Manual

MARSH SOUND DESIGN A200S
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MARSH SOUND DESIGN
OPERATING MANUAL
AS200
Power amplifier
Question and Answer IconNeed help?

Do you have a question about the MARSH SOUND DESIGN A200S and is the answer not in the manual?

MARSH SOUND DESIGN A200S Specifications

General IconGeneral
TypeStereo Power Amplifier
Gain26 dB
Frequency Response20Hz - 20kHz
Signal to Noise Ratio>100dB
Power output (8 ohms)100W RMS per channel

Summary

Safety Warnings

Electric Shock Precautions

Warnings and cautions regarding the risk of electric shock from opening the unit or exposed voltage.

Fire and Moisture Hazard Warning

Warning to prevent fire or shock by avoiding exposure to rain or moisture.

Important/Precautions

Unpacking

Connections

Internal Protections

Over-Current Protection

Amplifier enters protect mode and cuts power to protect against over-current faults.

DC-Fault Protection

Protect mode engages if DC voltage is detected at speaker outputs due to faults.

Overheat Protection

Unit shuts down if output transistors exceed 76°C; requires manual reset after cooling.

Troubleshooting Guide

Specifications