Marshall Amplification CODE 50 User Manual

FRONT PANEL FUNCTIONS (CONT.)
18. REV (CONT.)
ENGLISH
POWER AMP MODELS
19. POWER
This is the section of a conventional amplier that provides power to drive the speaker(s).
The power valves are an integral part of how an all-valve amplier sounds. MST modelling
faithfully recreates the four valve power amps models in CODE:
FRONT PANEL FUNCTIONS (CONT.)
A:>>|<<
ENGLISH
18. REV (CONT.)
REVERB TYPES
A:>>|<<
REVERB TYPES
Hall
Hall Reverb recreates the longer acoustic reections of a hall-sized space. Hall
Reverb’s editable parameters are:
PARAMETER VALUE RANGE DESCRIPTION
Decay 0 - 10 Controls how long it takes for the reections to fade.
Pre-delay 0 - 10 Adjusts the amount of time before the rst reection
is heard.
Tone 0 - 10 Adjusts the amount of higher frequency content in the
reections.
Level 0 - 10 Adjusts the level of the Reverb effect.
Spring
Spring Reverb is a classic, analogue way of creating Reverb FX. Conventional Spring
Reverb uses a metal tray containing rows of springs. The guitar signal passes along
the springs creating a vintage sounding Reverb effect. Spring Reverb’s editable
parameters are:
PARAMETER VALUE RANGE DESCRIPTION
Decay 0 - 10 Controls how long it takes for the reections to fade.
Pre-delay 0 - 10 Adjusts the amount of time before the rst reection
is heard.
Tone 0 - 10 Adjusts the amount of higher frequency content in the
reections.
Level 0 - 10 Adjusts the level of the Reverb effect applied to the
unaffected signal.
Stadium
Stadium Reverb recreates the acoustic reections of a very large space. Stadium
Reverb’s editable parameters are:
PARAMETER VALUE RANGE DESCRIPTION
Decay 0 - 10 Controls how long it takes for the reections to fade.
Pre-delay 0 - 10 Adjusts the amount of time before the rst reection
is heard.
Tone 0 - 10 Adjusts the amount of higher frequency content in the
reections.
Level 0 - 10 Adjusts the level of the Reverb effect.
A:>>|<<
Classic Marshall 100W
Class A/B 100 Watt with EL34 valves.
PARAMETER VALUE RANGE DESCRIPTION
Presence 0 - 10 In a conventional amplier Presence is a power stage
function that adds higher frequency content to the
sound.
Resonance 0 - 10 In a conventional amplier Resonance is a power stage
function that adds lower end thud to the sound.

Marshall Amplification CODE 50 Specifications

General

Power Output	50W
Reverb	Yes
Amp Modeling	Yes
Headphones	Yes
Footswitch Included	No
Speaker	1 x 12"
Connectivity	Bluetooth, USB
Footswitch I/O	1/4" Footswitch Input
Type	Digital Combo Amplifier