Need help?Do you have a question about the Marshall Amplification CODE25 and is the answer not in the manual?
General| Brand | Marshall Amplification |
|---|---|
| Model | CODE25 |
| Category | Amplifier |
| Language | English |
Connect via USB for DAW interface, music library playback, firmware updates, and MIDI control.
Use this jack socket to connect your guitar to the amplifier for sound input.
Controls the amount of gain introduced to a preset, affecting preamp drive.
Adjusts the warmth and low-end depth of your sound.
Adjusts the amount of body in your sound by boosting or cutting midrange frequencies.
Makes your sound brighter and more cutting, or softer and less edged.
Controls the volume level within a selected preset.
A Preset is a combination of preamp, power amp, speaker models, and FX, stored to a location.
Controls the overall volume level of your CODE amplifier.
Controls for activating/bypassing different sections in the guitar signal chain.
Effects that would typically plug into a conventional amplifier between guitar and input.
Affects dynamic range by decreasing peaks above a threshold for clarity and consistency.
Simulates solid-state Distortion and Overdrive FX pedals with various modes and controls.
Preamp models that faithfully recreate classic and modern Marshall valve tones.
A dynamic filter similar to a Wah Wah pedal, controlled by input level or LFO.
Generates chromatic harmonies to fine tune pitches, producing octaves or 3rds, 4ths, 5ths.
Modulation FX that apply subtle pitch variation to the guitar signal.
Applies subtle pitch variation for shimmering, delicate undulations or full wobble.
Creates vivid, harmonically complex sounds like 'jet plane' Doppler FX.
Uses all-pass filters to shift the guitar signal, creating classic Phaser sound.
Delay FX that can be in stompbox or rack form, often connecting via an amplifier's FX loop.
A high fidelity delay line allowing layering of up to 4 second loops.
Recreates the sound of analogue delays with editable time, feedback, age, and level.
Adds rhythmic repeats for more complex delay patterns with editable parameters.
Repeats run backwards, adding texture and an eerie quality to your sound.
Allows matching Delay time to music tempo by tapping the EDIT selector or footcontroller.
Reverb FX that can be in stompbox form, rack form or integrated within an amplifier.
Recreates acoustic reflections of small to larger rooms with editable decay, pre-delay, tone, and level.
Recreates longer acoustic reflections of a hall-sized space with editable parameters.
Creates a vintage sounding Reverb effect using analogue spring simulation.
Recreates acoustic reflections of a very large space with editable parameters.
Provides power to drive the speaker(s), recreating valve power amp models.
Model of a 100 Watt Class A/B power amp with EL34 valves, featuring Presence and Resonance.
Model of a 30 Watt Class A/B power amp with 5881 valves, featuring Presence and Resonance.
Model of a 30 Watt Class A power amp with EL84 valves, featuring Presence and Resonance.
Model of a 100 Watt Class A/B power amp with 6L6 valves, featuring Presence and Resonance.
Speaker Cabinet models that faithfully recreate classic Marshall cabinet configurations.
Lists the MST modelled speaker cabinets, including various 4x12, 2x12, and 1x12 configurations.
Returns to the main Preset screen or saves edited settings by pressing and holding.
Shows a Preset's name, number, parameter settings, and tuner display.
To Next Page