Need help?Do you have a question about the Marshall Electronics MXL Cr89 Series and is the answer not in the manual?
The high isolation shockmount may shift during shipping. Adjust elastic bands to center the microphone in the assembly.
This unit requires phantom power at 48 volts, ± 4 volts. Ensure phantom power is switched on.
Connects via XLR cable (not included). Use a quality cable for optimal sound and to avoid noise.
Store in its case to protect from dust. Use a pop filter for close vocals to avoid moisture damage.
Guaranteed against defects for three years from purchase. Requires dated sales receipt for claims.
General| Type | Condenser |
|---|---|
| Polar Pattern | Cardioid |
| Output Connector | XLR |
| Connector | XLR |
| Frequency Response | 20Hz - 20kHz |
| Power Requirements | 48V Phantom Power |
| Sensitivity | -36 dBV |
To Next Page
