Marshall Electronics VDA-104-3GS - Introduction; Features; Package Contents; Hardware Installation

Marshall Electronics
www.LCDracks.com
INTRODUCTION
The VDA-104-3GS provides reclocking distribution of an SDI video input signal to four SDI outputs.
The input type, whether SDI, HD SDI or 3G SDI is auto detected and displayed via LED indicators.
FEATURES
• Supports270Mb/s,1.485Gb/s,and2.97Gb/sdatarates
• Supportedvideoformats:
-SD:480i59.94“NTSC”,576i50“PAL”
-HD:720p24,25,30,50,59.94,and60
1080i50,59.94,and60
1080p24,25,and30
-3G:1080p50,59.94and60.SupportsLevelAandB.
-2K:2048x1080p24and30
• Supportedaudioformatupto8channels,24-bit,and48KHz
• Reclockingfunctionreshapesthesignaltoimprovetransmissiondistance
• VideoformatLEDindication
• Compactmetalhousingwithmountingears
HARDWARE INSTALLATION
PACKAGE CONTENTS
• VDA-104-3GSunit
• Poweradapter
• UserManual
1. Connect source device (such as a camera) to the SDI IN connector.
2. Connect the destination devices (such as displays, recorders, switchers) to the SDI OUT
connectors.
3. Connect the power adapter to the VDA-104-3GS.
4. Conrm that each destination device is receiving an input signal