Marshall Electronics VS-PTC-200 - Sleep Setting; Pin Setting; Joystick Calibration; Speed Setting

VS-PTC-200 Operating Instructions10
Sleep
Setting
-
1.
UUOff
2. 60m
3. 30m
4. 10m
5. 5m
6. 1m
7. 30s
Set sleep time of the
controller.
Pin
Setting
-
1.
UU
User
2. Admin
Set user and admin
pins of the controller
Pan Left
-
Calibrate the joystick
leftward
Pan Right
-
Calibrate the joystick
rightward
Tilt Up
-
Calibrate the joystick
upward
Tilt Down
-
Calibrate the joystick
downward
Zoom Tele
-
Calibrate the joystick
with Zoom Tele
Zoom Wide
-
Calibrate the joystick
with Zoom Wide
Free State
-
setting menu, no need
any operation.
-
UUSave
Save the calibration
setting
Joystick
Calib
-
UU
Cancel
Cancel the calibration
setting
Speed
Setting
-
1.
UUHigh
2. Middle
3. Low
Set control speed of
the joystick.
Default
Setting
-
1. Yes
2.
UUNo
Restore the keyboard
setting to factory
default.
Information
- -
Related information
for the control
keyboard