Need help?Do you have a question about the Marshall Electronics VS-PTC-200 and is the answer not in the manual?
General| Type | Joystick |
|---|---|
| Compatibility | CV620 |
| Product color | Black |
| Brand compatibility | Marshall Electronics |
| Placement supported | Indoor |
| Maximum weight capacity | - kg |
| Connectivity technology | Wired |
| Input voltage | 12 V |
Weight and Dimensions| Depth | 200 mm |
|---|---|
| Width | 120 mm |
| Height | 103 mm |
| Weight | 500 g |
General warnings for safe operation and handling of the camera controller.
Compliance statement regarding FCC rules for digital devices and radio noise emissions.
Product classification and potential interference in residential environments.
Overview of the VS-PTC-200 as a PTZ camera controller.
Key capabilities and design aspects of the camera controller.
Specifications including interface, protocol, baud rate, dimensions, and power.
Identification and description of physical buttons and controls on the unit.
Diagrams and descriptions of how to connect cameras and power.
Configure camera ID, protocol, baud rate, and address for control.
Set the current time in 24-hour format for the controller.
Options for how time is displayed on the controller's screen.
Adjust the audio volume level of the controller.
Control the backlight for the controller's keys.
Configure the time-out period before the controller enters sleep mode.
Set or change user and administrator PIN codes for security.
Recalibrate the joystick axes for accurate Pan, Tilt, Zoom, and Focus.
Adjust the operational speed of the joystick.
Restore keyboard settings to factory default values.
Display general information related to the control keyboard.
Detailed steps for configuring camera ID, protocol, baud rate, and address.
Step-by-step guide to set the controller's time.
How to select and adjust the controller's volume levels.
How to enable and adjust the controller's key backlight.
Procedure to configure the controller's automatic sleep mode.
Guide to setting and confirming user and admin PINs for protection.
Process for calibrating joystick movements for all functions.
Method to adjust the control speed of the joystick.
Steps to reset the controller's settings to factory defaults.
To Next Page